Summary
This guide helps SD35 employees install and use the Epson iProjection App on their iPhone/iPad devices for screen casting. It includes step-by-step instructions for setup, troubleshooting common issues, and FAQs about the app. Additional resources and IT support contact information are provided for further assistance.
Body
Overview
Purpose: The purpose of the guide is to show how to install and configure iProjection app on iPhone/iPad to enable casting to Epson projectors.
Audience: This guide is for SD35 employees needing cast their iPhone/iPad display to an Epson projector
Estimated time to complete: 5 minutes
Prerequisites
- iPhone/iPad connected to district network
- Epson Projector connected to network via Ethernet
Step-by-step Instructions
Step 1: Install Epson iProjection from the Appstore

Step 2: Agree to the terms

Step 3: Select the "IP address" and enter the IP address of the projector


Step 4: Select the projector and enter the keyword. Click "Mirror device screen" to cast to the projector.



Troubleshooting
-
App Crashes or Freezes
- Solution: Restart your device and ensure you have the latest version of Epson iProjection installed. If the issue persists, try reinstalling the app
-
Unable to Connect to Projector
- Solution: Verify that the projector and your device are on the same network. Check the IP address and keyword entered. Ensure the projector's wireless module is properly installed if required
-
Slow Loading or Performance Issues
- Solution: Close other apps running in the background to free up resources. Restart your device and check for any available updates for Epson iProjection
-
Projection Quality Issues
- Solution: Adjust the projector's settings for resolution and brightness. Ensure the projector lens is clean and the device screen is properly mirrored
Additional Resources